Salvation Nymph – 12/30/2011

On the same trip to the Conejos River when I purchased western green drakes I also purchased some dark beadhead nymphs with iridescent backs and small rubber legs. I never asked what they were called so I’ve named them shimmering pheasant tails. These nymphs were quite effective on the upper Conejos River on my first day of fishing there.

Purchased Iridescent Nymph

I used the nymphs in a dropper configuration behind a Chernobyl ant and caught a lot of fish along the edge.

I lost quite a few of the purchased flies, so I made sure to maintain at least one in my foam pocket to use as a model when I attempted to replicate. In fact I took the sample version with me on a trip to Charlie’s Fly Box in Old Arvada and asked the store salesperson to help me purchase the materials required to tie a shimmering pheasant tail. He did just that, and I returned home with two colors of ice dub, silly legs and a sheet of flash back black.

ComponentMaterial
HookTiemco 2457 Size 14 or 16
BeadGold to fit hook size
ThreadBlack
TailFibers from pheasant body feather
RibFine copper wire
FlashPearl flashabou
Nymph BackFlash back black
AbdomenSilver holographic ice dub
ThoraxBlack peacock ice dub
LegsSilly legs
Wing CaseFlash back black and pearl flashabou

 

I gathered all the materials together and placed the purchased shimmering nymph on the magnet beneath my vise and began my first fly. First I threaded the bead over the hook point and slid it to the eye of the hook. Next I attached thread and wrapped it to just beyond the hook bend. I tied in a short stubby tail using pheasant body feather fibers. This was the only natural material in the entire fly. Next came a section of fine copper wire and then a strand of pearl flashabou followed by a thin strip of the flash back black. I opened the package of silver holographic ice dub next and observed that it appeared to be a massive clump of tinsel. How does one apply this metallic stuff? I took a small amount and twirled it on to the thread and miraculously it adhered just like natural dubbing.

Dave’s Shimmering Pheasant Tail

I pulled the flash back black up over the dubbed abdomen and then the pearl flashabou as well and then spiral wrapped the copper wire to the front of the abdomen. Next I folded the flashabou and flash back toward the rear over the abdomen and locked it there with a few turns of thread. Now for the thorax I grabbed the packet of black peacock ice dub and spun it on to my thread. I wrapped the black peacock from the front of the abdomen to behind the bead and then cut two small sections of black silly legs and mounted them on both sides of the thorax. Finally I pulled the flash back and flashabou forward over the top of the thorax dubbing and tied down and whip finished. I trimmed the legs to be even on both sides and as a last step coated the head threads and the entire top of the fly with Sally Hanson Hard As Nails.

Top View, My Favorite

I removed the fly and placed it next to the purchased model and concluded that I’d produced a fairly close replica. This is another new creation I am anxious to test in 2012.

5 thoughts on “Salvation Nymph – 12/30/2011

  1. Devan Ence

    Nice work! The name of the fly is the Tunsten Salvation Nymph. It was designed on the Conejos River while trying to find a true guide bug (one that will hold up during a full day of abuse on the water). The only recommendation I would give is that the original material used for the dub in the abdomen and thorax are. Ice dud in the abdomen your choice in color and for the thorax I use black peacock ice dub. It really makes the fly pop and the fish really dig it.

    1. wellerfish Post author

      Devan,
      Thanks for your kind comments. Yes, after having a great experience in 2011 I returned in 2012 and stopped ay the Conejos River Angler and asked what the flies were called. The gentleman in the shop told me they were Salvation nymphs. In the winter of 2012 I took one of the purchased salvation nymphs to Charlie’s Flybox in Arvada and the sales clerk helped me purchase the materials to tie some.

    2. wellerfish Post author

      Devan,
      I’ve been tying some more salvation nymphs and using your recommendation of black peacock ice dub. I didn’t know this stuff existed. I have a question on tying technique. At what point do you tie in the rubber legs? I’ve been dubbing the black peacock thorax and then attaching the legs. Unfortunately this involves making a thread wrap or two over the dubbing to get the thread back to the position just in front of the abdomen to tie in the legs. Once I’ve tied in legs on both sides, I apply a small amount of ice dub to my thread and cover the thread wraps from tying in the legs and then move to a position just behind the bead with a few more wraps. I was wondering if you had a different method of doing this?

      Dave

  2. Pingback: Salvation Nymph – 01/06/2014 | Dave Weller's Fly Fishing Blog

  3. Pingback: Conejos River – 07/21/2015 | Dave Weller's Fly Fishing Blog

Comments are closed.